Model

PT-BX50C

Power specifications

100-240 V AC, 50/60 Hz

Power

365 W (power saving standby mode to the 1 * 0.3W, normal standby mode 11.5 W)

LCD panel

LCD panel size 16mm (0.63 inches) diagonal (4:3 aspect ratio)

Display mode Transmissive LCD panel (× 3, R/G/B)

Display pixels 786,432 (1,024x768) x 3, total 2,359,296 pixels

Lens

manual 1.6x zoom (projection ratio: 1.18-1.90:1), manual focus F 1.60–2.12, f 15.28–24.62mm

Lamp

280W x 1, lamp replacement cycle (bulb power: normal / energy saving mode): 2,500 hours / 4,000 hours * 2

Projection screen size (diagonal)

0.76-7.62m (30-300 inches), 4:3 aspect ratio

Brightness *3, 5,000 lumens (bulb power: normal mode)

Uniformity*3

85%

Contrast*3

4,000:1 (full on/full off, lamp power: automatic mode, lris: on)

Resolution

1,024 × 768 pixels * 4

Scan frequency

HDMI ： 

RGB (analog) ：

YPBPR (YCBCR) ：

Video/S-Video：

fH:25-80 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower

fH:15-100 kHz, fV: 50-100 Hz, dot clock: 140 MHz or lower(Resampling when the signal exceeds the 140 MHz point clock rate)

fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)]

 fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)]

 fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]

 fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]

Save

fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

Keystone correction range

vertical: +40%

Keystone correction range

vertical: ±30° (±20° in the trapezoidal correction range)

Installation method

lifting / laying, front / rear projection

Terminal interface

HDMI input：

Computer 1 input：

Computer 2 input：

Monitor output：

Video Input：

S-Video Input：

Audio input：

Computer audio input 1：

Computer audio input 2：(microphone input)

Audio output：

Serial input：

LAN：

(HDMI 19-pin) × 1 (HDCP compatible)

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*5,

Compatible only with progressive signals, dot clock: 25 -146.25 MHz

D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)

/

D-Sub HD 15-pin (female) × 1 (RGB × 1) (use the on-screen menu for input/output selection)

(When the computer 2 selects the monitor output, the output signal is the signal input from the computer 1)

RCA pin × 1 (composite video)

Mini DIN 4-pin x 1 (S-Video)

RCA pin x 2 (L-R x 1) for video/S-video input

M3 x 1 (L-R x 1)

M3 x 1 (L-R x 1) for audio input or microphone connection (variable)

M3 x 1 (L-R x 1) for output (variable)

D-sub 9-pin (female) × 1 for external control (compatible with RS-232C)

RJ-45 × 1 [for network connection, 10Base-T/100Base-TX, for PJLinkTM (class 1)]

Built-in speaker

4 cm round x 1, output power: 10W (mono)

Noise level

37dB (bulb power: normal mode), 29dB (bulb power: energy saving mode)

Body material

resin molded product

​

379x107x305mm(with the shortest support legs, no protruding parts)

Weight

about 4.8kg

Operating environment

Operating temperature: 0°C–40°C*6, Operating humidity: 20%-80% (no frosting)

Supplied accessories

power cord x 1, power cord retention bracket x 1, wireless remote control, remote control battery (AAA/R03/LR03 type x 2), carrying soft case x 1, 

RGB cable (1.8 m for VGA) x 1, software CD-ROM (Logo transfer software, multiple projector monitoring software)